ZB-10-T料位開關
ZB-10-T阻旋料位開關產品概述
ZB-10-T阻旋料位開關是一種用于固態物料（如粉狀、粒狀、塊狀、膠狀等）的物位控制設備，廣泛應用于化工、塑料、水泥、制藥、飼料及食品等行業。該設備通過永磁電機驅動葉片旋轉，當物料接觸葉片時，阻力觸發檢測裝置輸出開關信號并切斷電源，實現料位監測；物料下降后，葉片自動恢復旋轉狀態。其設計兼顧密封性與過載保護能力，葉片材質采用SUS304不銹鋼，適應多種工業環境。用戶可根據物料比重調整彈簧拉力，優化靈敏度。產品支持多種電源輸入（220VAC/110VAC/24VAC），防護等級為IP65，適用于-10℃至80℃環境（特殊定制可擴展至高溫場景）。719
ZB-10-T Rotary Paddle Level Switch Product Introduction
The ZB-10-T rotary paddle level switch is designed for solid material level control, including powders, granules, and viscous substances, in industries such as chemicals, plastics, and food processing. Its operation relies on a permanent magnet motor rotating a paddle; when material obstructs the paddle, resistance triggers a switch signal and halts rotation, while material retreat resets the mechanism automatically. The device features a sealed housing with overload protection, SUS304 stainless steel paddle, and adjustable spring tension for varying material densities. Compatible with 220VAC/110VAC/24VAC power supplies, it operates in temperatures from -10℃ to 80℃ (extendable with customization) and offers IP65 protection. The compact design simplifies installation and maintenance, making it suitable for dusty or humid environments.421
產品特點與優勢
ZB-10-T采用全密閉結構和油封設計，有效防止粉塵滲入，延長使用壽命。其機電分離式設計便于維護，無需整體拆卸。葉片過載時，馬達自動打滑以避免損壞。水平安裝時建議葉片向下傾斜10°~20°，減少物料沖擊。設備輕巧，支持側裝或頂裝，法蘭接口適配性強。注意避免直接安裝于進料口，必要時可加裝防護擋板。122
Features and Benefits
The ZB-10-T ensures reliability with a fully sealed housing and oil-sealed shaft to prevent dust ingress. Its modular design allows easy maintenance without disassembly. The motor slips automatically under excessive load to protect internal components. For horizontal installation, a 10°~20° downward tilt minimizes material impact. Lightweight and adaptable to flange connections, it supports side or top mounting. Installation away from direct feed streams is recommended, with optional baffles for high-impact areas.523
應用場景與注意事項
該產品適用于倉內粉塵濃度高或物料粒度細的場合，如細粉分離器料倉。調試時可通過連續加料/排料驗證高低位報警功能。需注意根據物料密度調整扭力彈簧，避免誤動作。接線盒入線口需垂直朝下并鎖緊電纜螺母，潮濕環境建議加防雨罩。1921
Applications and Considerations
Ideal for high-dust or fine-particle environments (e.g., powder silos), the ZB-10-T’s performance can be validated via continuous material flow tests. Adjust torque springs based on material density to optimize response. Cable entries must face downward with secured nuts; rain covers are advised in humid conditions. Avoid mounting near aggressive chemical vapors to preserve housing integrity.724
ZB-10-T料位開關
ZB-10-T
產品描述
阻旋料位開關也有的稱之為阻旋物位計或者阻旋料位開關、阻旋物位開關等，主要是根據它具體的不同用途的不同名稱。阻旋式料位開關是采用交流微電機經減速后，帶動檢測葉片慢速旋轉。當被測物料的料位上升使葉片的轉動受到阻擋時，檢測機構主軸產生旋轉位移。此位移先使一個微動開關動作，發出有料的信號。隨后另一個微動開關動作，切斷微電機的電源使其停止轉動。只要倉內的料位不變，此種狀態便將一直保持下去。
詳細描述：
斷料報警器/斷煤開關
結構緊湊,外型小巧，進口品質、國產價格；
鋁合金殼體,堅實可靠;
原裝進口電機,性能穩定.
檢測散裝固體物料的旋轉葉片式開關技術；
高度集成的機械宇航密封，可防止粉塵沿軸滲入；
獨特的彈性離合器結構，葉片過載時，自動保護電機；
特殊葉片可用于低密度物料；
堵料報警開關系列分保護管型、旋轉確認型、長度變更型、耐熱型；
電源電壓：：220VAC（110VAC、24VAC、24VDC可選）；
觸點容量：250VAC/（阻性負載），單刀雙擲,雙刀雙擲；
工作溫度：-10～80℃（高溫型1000℃）；
防護等：IP65，特殊型號耐壓防爆。
ZB-10-T料位開關
塑殼斷路器XT2S160 TMA80/800 WMP 3P
天平NBL3602i
微型斷路器S201-K10
交流微型斷路器S801N-C100
上一篇 CLSSH-2DS料位開關 http://www.beilingo.com/product/d166821.html
|
