瑞得經緯儀專用電池RB-10（上觸點鎳氫電池）產品介紹
瑞得經緯儀專用電池RB-10（Regetek Surveying Battery RB-10）是專為工程測量設備研發的鎳氫（Ni-MH）可充電電池組。該產品采用定制化觸點布局設計，精準匹配各類經緯儀設備的供電接口需求，為測繪儀器提供穩定可靠的續航保障。
核心優勢：
-
適配性強：依據經緯儀供電系統特性進行結構開發，上置式觸點定位精確，可適配多代機型。外殼采用工程級ABS材料，配備防滑紋路與加固卡扣，確保設備安裝穩固性。
-
持久續航：配置高性能鎳氫電芯，額定容量達2000mAh，支持連續工作8-10小時。智能型充放電管理系統有效控制自放電率，待機狀態下月?lián)p耗低于15%。
-
環境適應：工作溫度范圍覆蓋-10℃至50℃，內置溫度補償模塊，保障高寒、酷熱等極端環境中的電力穩定輸出�？拐鸾Y構設計通過200次1米跌落測試驗證。
-
安全環保：無記憶效應設計支持隨充隨用，符合RoHS環保指令要求。多層電路保護系統可智能防范過充、過放及短路風險。
應用場景：
本產品適用于建筑測繪、地質勘探、道路施工等戶外作業場景，可配合全站儀、電子經緯儀等設備進行長時間連續測量。其穩定的電壓輸出特性有助于維持設備測量精度，特別適用于隧道、礦區等復雜工況環境。
使用說明：
建議使用配套專用充電器進行充電，完整充電周期約3.5小時。長期停用時應保持50%電量存儲于陰涼干燥環境。產品配置LED電量指示燈，三色顯示可直觀掌握剩余電量。
瑞得電池始終秉持"精準匹配·持久動力"的產品理念，通過嚴謹?shù)墓に嚳刂坪推焚|檢測體系，為專業測量設備提供優質能源解決方案。
Regetek Surveying Battery RB-10 (Top-contact Ni-MH Battery) Product Introduction
The Regetek Surveying Battery RB-10 is a nickel-metal hydride (Ni-MH) rechargeable battery pack specifically engineered for engineering surveying instruments. Featuring a customized contact layout, this product precisely matches the power interface requirements of various theodolite devices, delivering stable and reliable power supply for measurement equipment.
Key Features:
-
Enhanced Compatibility: Developed with structural optimization based on theodolite power systems, the top-positioned contacts ensure accurate alignment with multiple device generations. The engineering-grade ABS housing incorporates anti-slip textures and reinforced latches for secure installation.
-
Extended Runtime: Equipped with high-performance Ni-MH cells offering 2000mAh rated capacity, supporting 8-10 hours of continuous operation. The intelligent charge-discharge management system maintains low self-discharge rate, with less than 15% monthly power loss in standby mode.
-
Environmental Resilience: Operational temperature range spans from -10℃ to 50℃, with built-in temperature compensation module ensuring stable power output in extreme conditions. Shock-resistant structure validated through 200-cycle 1-meter drop tests.
-
Eco-safe Design: Memory effect-free operation allows flexible charging cycles, compliant with RoHS environmental standards. Multi-layer circuit protection prevents overcharge, over-discharge, and short circuit risks.
Application Scenarios:
Ideal for construction surveying, geological exploration, and road engineering operations, this battery supports prolonged field measurements with total stations and electronic theodolites. Its consistent voltage output helps maintain instrument accuracy, particularly suitable for tunnel construction and mining operations.
Usage Guidelines:
Charge using the matching dedicated charger (full charge cycle: approx. 3.5 hours). For long-term storage, maintain 50% charge level in cool, dry environments. The built-in tri-color LED indicator provides real-time power status monitoring.
Adhering to the principle of "Precision Compatibility · Sustained Power", Regetek implements stringent quality control processes to deliver premium energy solutions for professional measurement tools.
