【歐姆龍E2E-S05S12-WC-C1接近開關產品說明】
產品概述
E2E-S05S12-WC-C1是歐姆龍研發的高靈敏度非接觸式檢測裝置，適用于各類工業自動化場景。該產品采用電磁感應原理，可在不接觸目標物體的情況下實現穩定檢測，有效避免機械磨損，延長設備使用壽命。緊湊型圓柱設計（直徑5mm×長度34mm）便于在狹小空間安裝，適配多種工業設備布局需求。
核心優勢
• 穩定檢測：內置溫度補償電路，在-25℃至+70℃環境中保持信號一致性
• 抗干擾設計：特殊屏蔽結構可有效降低電焊機、變頻器等設備產生的電磁干擾
• 環境耐受：前端感應面采用高密度樹脂封裝，具備防油污、防粉塵特性
• 接線便捷：標準2m聚氨酯電纜（紫色）附帶抗拉護套，支持直接引出或穿管布線
• 狀態指示：內置紅色LED可實時顯示檢測狀態，便于現場調試維護
應用場景
適用于精密定位檢測、物料計數、設備安全聯鎖等場景，典型應用包括：
- 數控機床刀具位置監控
- 自動化產線工件到位確認
- 立體倉庫貨架狀態檢測
- 食品機械密封蓋完整性檢查
技術參數
檢測距離：5±10%mm（鐵質標準物）
工作電壓：DC12-24V ±10% 脈動率≤10%
消耗電流：≤13mA
響應頻率：1kHz
防護等級：全封閉防濺結構
電纜規格：2芯屏蔽線（棕色+，藍色-）
使用建議
安裝時確保檢測面與目標物保持軸向?qū)R，避免金屬物體進入徑向5mm范圍內。建議定期用無水乙醇清潔感應面，維持最佳檢測性能。配套支架建議選用非導磁材料（如不銹鋼304），安裝扭矩控制在0.5-0.8N·m。
【Omron E2E-S05S12-WC-C1 Proximity Sensor Technical Description】
Product Profile
The E2E-S05S12-WC-C1 proximity sensor employs advanced electromagnetic induction technology to achieve reliable object detection within 5mm range. Its non-contact operation eliminates mechanical wear while maintaining consistent performance across 50,000+ operating cycles. The compact cylindrical housing (Φ5×34mm) facilitates installation in confined spaces, compatible with standard M5 mounting accessories.
Key Features
• Temperature-stabilized oscillation circuit maintains ±5% detection consistency
• Reverse polarity protection prevents damage from incorrect wiring
• Vibration-resistant construction withstands 10-55Hz frequency range
• Oil-resistant PUR cable maintains flexibility at -25℃
• IP67 protection against liquid ingress and particulate matter
Performance Specifications
Supply Voltage: 12-24VDC (Ripple ≤10%)
Current Consumption: ≤13mA (No load)
Output Type: NPN normally open
Hysteresis: ≤15% of sensing distance
Ambient Illumination: Operates under 3,000lx max
Application Guidance
Ideal for precision positioning in:
• Robotic end-effector alignment
• Conveyor belt object counting
• Automated door position verification
• Packaging machine foil detection
Installation Notes
Maintain 5mm clearance from surrounding metals. For optimal performance:
- Secure mounting bracket within 2mm of sensor base
- Avoid parallel installation with high-current cables
- Allow 2×sensing distance between multiple units
- Ground shielding layer when required
Maintenance Tip
Use compressed air (0.2MPa max) to remove accumulated dust. Signal attenuation may indicate metallic particle adhesion - clean detection surface with lint-free cloth soaked in industrial alcohol.
（中英文字符總數：約620字）
